User`s manual

H.323 User's Manual E. Accessory Programs and Tools
Version 5.0 399 December 2006
¾ To decode an encoded ini file, take these 4 steps:
1. Click the Select File… button under the ‘Decode ini File(s)’ section.
2. Navigate to the folder that contains the file you want to decode.
3. Click the file and click the Open button. the name and path of both the encode ini file
and the output decoded file appear in the fields under the Select File button. Note that
the name of the output file can be modified.
4. Click the Decode File(s) button; a decoded ini file with the name you specified is
created.
Note: The decoding process verifies the input file for validity. Any change made
to the encoded file causes an error and the decoding process is aborted.
E.1.4 Creating a Loadable Prerecorded Tones File
For detailed information on the PRT file, refer to Section 16.2 on page 371.
¾ To create a loadable PRT dat file from your raw data files, take
these 7 steps:
1. Prepare the prerecorded tones (raw data PCM or L8) files you want to combine into a
single dat file using standard recording utilities.
2. Execute the TrunkPack Downloadable Conversion utility, DConvert.exe (supplied with
the software package); the utility’s main screen opens (shown in Figure E-1).
3. Click the Process Prerecorded Tones File(s) button; the Prerecorded Tones File(s)
screen, shown in Figure E-5, opens.