User`s manual

Mediant 1000
H.323 User's Manual 404 Document #: LTRT-83401
Figure E-9: Recording Screen after Automatic Detection
3. All four Call Progress Tones are saved (as standard A-law PCM at 8000 bits per
sample) in the same directory as the CPTWizard.exe file is located, with the following
names:
• cpt_recorded_dialtone.pcm
• cpt_recorded_busytone.pcm
• cpt_recorded_ringtone.pcm
• cpt_recorded_invalidtone.pcm
Notes:
• If the gateway is configured correctly (with a Call Progress Tones dat
file loaded to the gateway), all four Call Progress Tones are detected
by the gateway. By noting whether the gateway detects the tones or
not, you can determine how well the Call Progress Tones dat file
matches your PBX. During the first run of the CPTWizard, it is likely
that the gateway does not detect any tones.
• Some tones cannot be detected by the Mediant 1000 gateway
hardware (such as 3-frequency tones and complex cadences).
CPTWizard is therefore limited to detecting only those tones that can
be detected on the Mediant 1000 gateway.
At this stage, you can either click Next to generate a Call Progress Tones ini file and
terminate the wizard, or continue to manual recording mode.