User`s manual

Mediant 1000
H.323 User's Manual 412 Document #: LTRT-83401
Table F-2: acBoardConfigurationError Alarm Trap
Alarm:
acBoardConfigurationError
OID:
1.3.6.1.4.1.5003.9.10.1.21.2.0.2
Default Severity
Critical
Event Type:
equipmentAlarm
Probable Cause:
underlyingResourceUnavailable (56)
Alarm Text:
Board Config Error: <text>
Status Changes:
Condition:
A configuration error was detected
Alarm status: critical
<text> value: A run-time specific string describing the configuration error.
Condition:
After configuration error
Alarm status: Status stays critical until reboot. A clear trap is not sent.
Corrective Action:
Inspect the run-time specific string to determine the nature of the configuration
error. Fix the configuration error using the appropriate tool: Web interface, EMS,
or ini file. Save the configuration and if necessary reset the device.
Table F-3: acBoardTemperatureAlarm Alarm Trap
Alarm:
acBoardTemperatureAlarm (doesn’t apply to the TP-260 board)
OID:
1.3.6.1.4.1.5003.9.10.1.21.2.0.3
Default Severity
Critical
Event Type:
equipmentAlarm
Probable Cause:
temperatureUnacceptable (50)
Alarm Text:
Board temperature too high
Status Changes:
Condition:
Temperature is above 60 degrees C (140 degrees F)
Alarm status: Critical
Condition:
After raise, temperature falls below 55 degrees C (131 degrees F)
Alarm status: Cleared
Corrective Action:
Inspect the system. Determine if all fans in the system are properly operating.