User`s manual

H.323 User's Manual F. SNMP Traps
Version 5.0 415 December 2006
Table F-9: acgwAdminStateChange Alarm Trap
Alarm:
acgwAdminStateChange
OID:
1.3.6.1.4.1.5003.9.10.1.21.2.0.7
Default Severity
Major
Event Type:
processingErrorAlarm
Probable Cause:
outOfService (71)
Alarm Text:
Network element admin state change alarm Gateway is <text>
Status Changes:
Condition:
Admin state changed to shutting down
Alarm status: Major
<text value>: Shutting down. No time limit.
Condition:
Admin state changed to locked
Alarm status: Major
<text value>: Locked
Condition:
Admin state changed to unlocked
Alarm status: Cleared
Corrective Action:
A network administrator has taken an action to lock the device. No corrective
action is required.
Table F-10: acOperationalStateChange Alarm Trap
Alarm:
acOperationalStateChange
OID:
1.3.6.1.4.1.5003.9.10.1.21.2.0.15
Default Severity
Major
Event Type:
processingErrorAlarm
Probable Cause:
outOfService (71)
Alarm Text:
Network element operational state change alarm. Operational state is disabled.
Note:
This alarm is raised if the operational state of the node goes to disabled. The
alarm is cleared when the operational state of the node goes to enabled. In IP
systems, the operational state of the node is disabled if the device fails to
properly initialize.
Status Changes:
Condition:
Operational state changed to disabled
Alarm status: Major
Condition:
Operational state changed to enabled
Alarm status: Cleared
Corrective Action:
In IP systems, check for initialization errors. Look for other alarms and Syslogs
that might provide additional information about the error.