User`s manual

Mediant 1000
H.323 User's Manual 430 Document #: LTRT-83401
¾ To install the Hard Drive (HDMX) module, take these 6 steps:
1. Place the Mediant 1000, so that the rear panel is facing you, as shown in Figure H-6 .
2. Remove the black metal cover plates in the first and second slots located on the right
side of the power connection, as shown in Figure H-7.
3. Use the cutter tool to remove the small metal strip between the upper and lower slots,
as shown in Figure H-8.
4. Insert the Hard Drive (HDMX) module in the second slot, as shown in Figure H-10.
Figure H-10: Inserting the HDMX Module
5. Push the Hard Drive (HDMX) module into the slot and press on it firmly to ensure it
has been fully inserted.
6. Using a straight regular screwdriver, tighten the mounting pins.