User`s manual

Mediant 1000

H.323 User's Manual 432 Document #: LTRT-83401

I.3 Physical Mounting Requirements

I.3.1 Mediant 1000 Front Panel Connection

¾ To connect to the front panel, take these 3 steps:

1. Connect the RS-232 cable from the PC to the RS-232 port on the Mediant 1000.

2. Connect the USB connection cable from the external CD-ROM to the USB port. Refer

to the figure below.

Figure I-1: Mediant 1000 Front Panel Connections

I.3.2 Mediant 1000 Rear Panel Connection

¾ To connect to the rear panel, take these 3 steps:

1. Connect the Ethernet cable to the ACT Link, on the rear side of the Mediant 1000.

1. Connect the external CD-ROM power supply.

2. Connect the Mediant 1000 power supply.

I.4 Software Installation

The following three sections describe how to install different versions of Linux

 Linux

RedHat (and Fedora) Installation

 Linux

Debian Installation

 Linux

SUSE Installation

I.5 Linux™ RedHat (and Fedora) Installation

Instructions

Perform the following four stages for Linux

Redhat (and Fedora) Installation. (Some

distributions of Linux

may vary slightly):

I.5.1 Stage 1: Obtaining the ISO Image

In order to obtain an updated ISO image, either download it from the AudioCodes website

as described in Section I.5.1.1, or create it using the steps detailed in Section I.5.1.2.