User`s manual

H.323 User's Manual I. Linux™ Operating System Installation for the OSN Server
Version 5.0 457 December 2006
I.7.5 Stage 4: Burn the CD
¾ To burn the CD image, take these 3 steps:
1. Open a burning utility.
2. Use the Burn Image option to burn the boot.iso to an empty CD media.
3. Mark the media as the “Boot CD”.
Note: Ensure that the boot.iso file should be burned as an image and not as a
data file.
I.7.6 Stage 5: Installation
Now you have the boot media which enables SUSE installation of the Mediant 1000 using
serial connection (terminal) with RS232 cable.
¾ To complete the installation, take these 8 steps:
1. Connect your Windows™ PC via serial cable to the Mediant 1000.
2. Open the Terminal application on your Windows™ PC. (Refer to the Additional
Requirement in Section I.7.1 on page 450) Create a new connection with the
following:
• Connect Port = COM1
• Baudrate = 115200 (or bits per second)
• Data Bits = 8
• Parity = None
• Stop Bits = 1
• Flow Control = None
• Terminal settings: = 132x47, ANSI Color (optional)
Note: If you are using Tera Term, navigate to the “Setup” option in the main
menu and use the following configuration.
Serial port:
Baud rate: 115200
Terminal Setup:
Terminal size: 132x47
Term size = win size
Terminal ID: VT100
Window:
Scroll buffer: 47
Font:
Font: Terminal
Size: 8 (the default size is 10. If the window “slides” beyond your display
then set the size to 8)
3. Connect the USB CD-ROM device via USB cable to the M1K.
4. Insert the “Boot CD” to the USB CD-ROM.