User`s manual

H.323 User's Manual 5. Web Management
Version 5.0 63 December 2006
5.5.1.1 General Parameters
The General Parameters option is used to configure general H.323 parameters.
¾ To configure the general parameters under Protocol Definition,
take these 4 steps:
1. Open the ‘General Parameters’ screen (Protocol Management menu > Protocol
Definition submenu > General Parameters option); the ‘General Parameters’ screen
is displayed.
Figure 5-5: Protocol Definition, General Parameters Screen
2. Configure the general parameters according to Table 5-3.
3. Click the Submit button to save your changes.
4. To save the changes so they are available after a power fail, refer to Section 5.9.2 on
page 193.