User`s manual

H.323 User's Manual 5. Web Management
Version 5.0 69 December 2006
5.5.1.2 Gatekeeper Parameters
Use this screen to configure parameters that are associated with Gatekeepers.
¾ To configure the Gatekeeper parameters, take these 4 steps:
1. Open the ‘Gatekeeper’ parameters screen (Protocol Management menu > Protocol
Definition submenu > Gatekeeper option); the ‘Gatekeeper’ parameters screen is
displayed.
Figure 5-6: Gatekeeper Parameters Screen
2. Configure the Gatekeepers parameters according to Table 5-4.
3. Click the Submit button to save your changes, or click the Register or Un-Register
buttons to save your changes and to register / unregister to a Gatekeeper.
4. To save the changes so they are available after a power fail, refer to Section 5.9.2 on
page 193.