User`s manual

H.323 User's Manual 5. Web Management
Version 5.0 75 December 2006
5.5.1.4 DTMF & Dialing Parameters
Use this screen to configure parameters that are associated with DTMF and dialing.
¾ To configure the dialing parameters, take these 4 steps:
1. Open the ‘DTMF & Dialing’ screen (Protocol Management menu > Protocol
Definition submenu > DTMF & Dialing option); the ‘DTMF & Dialing’ screen is
displayed.
Figure 5-8: DTMF & Dialing Screen
2. Configure the DTMF & Dialing parameters according to Table 5-6.
3. Click the Submit button to save your changes.
4. To save the changes so they are available after a power fail, refer to Section 5.9.2 on
page 193.
Table 5-6: DTMF & Dialing Parameters (continues on pages 75 to 77)
Parameter Description
Rx DTMF Option
[RxDTMFOption]
Supported Receive DTMF negotiation method.
You can select one of the following options:
Not Supported [0] (default).
H.245 User Input [1].
H.245 Signal Method [2].
RFC 2833 [3].
All [4] = Accept all DTMF methods.
For information on DTMF transport types, refer to Section
8.2 on page 260.