User`s manual

Mediant 1000
H.323 User's Manual 78 Document #: LTRT-83401
5.5.2 Configuring the Advanced Parameters
Use this submenu to configure the following gateway’s advanced control protocol
parameters:
 General Parameters (refer to Section 5.5.2.1 on page 78)
 Supplementary Services (refer to Section 5.5.2.2 on page 85)
 Metering Tones (refer to Section 5.5.2.3 on page 88)
 Keypad Features (refer to Section 5.5.2.4 on page 90)
5.5.2.1 General Parameters
Use this screen to configure general control protocol parameters.
¾ To configure the general parameters under Advanced Parameters,
take these 4 steps:
1. Open the ‘General Parameters’ screen (Protocol Management menu > Advanced
Parameters submenu > General Parameters option); the ‘General Parameters’
screen is displayed.