User`s manual

H.323 User's Manual 5. Web Management
Version 5.0 85 December 2006
5.5.2.2 Supplementary Services
Use this screen to configure parameters that are associated with supplementary services.
For detailed information on the supplementary services, refer to Section 8.1 on page 257.
¾ To configure the supplementary services’ parameters, take these 4
steps:
1. Open the ‘Supplementary Services’ screen (Protocol Management menu >
Advanced Parameters submenu > Supplementary Services option); the
‘Supplementary Services’ screen is displayed.
Figure 5-10: Supplementary Services Screen
2. Configure the supplementary services parameters according to Table 5-8.
3. Click the Submit button to save your changes.
4. To save the changes so they are available after a power fail, refer to Section 5.9.2 on
page 193.