User`s manual

H.323 User's Manual 5. Web Management
Version 5.0 91 December 2006
4. To save the changes so they are available after a power fail, refer to Section 5.9.2 on
page 193.
Notes:
• The method used by the gateway to collect dialed numbers is identical
to the method used during a regular call (i.e., max digits, interdigit
timeout, digit map, etc.).
• The activation of each feature remains in effect until it is deactivated
(i.e., it is not per call).
Table 5-10: Keypad Features Parameters (continues on pages 91 to 91)
Parameter Description
Forward
Note that the forward type and number can be viewed in the Call Forward Table (refer to Section 5.5.7.4 on
page 117)
Unconditional
[KeyCFUnCond]
Keypad sequence that activates the immediate forward option.
No Answer
[KeyCFNoAnswer]
Keypad sequence that activates the forward on no answer option.
On Busy
[KeyCFBusy]
Keypad sequence that activates the forward on busy option.
On Busy or No Answer
[KeyCFBusyOrNoAnswer]
Keypad sequence that activates the forward on ‘busy or no answer’ option.
Do Not Disturb
[KeyCFDoNotDisturb]
Keypad sequence that activates the Do Not Disturb option (immediately reject
incoming calls).
To activate the required forward method from the telephone:
 Dial the preconfigured sequence number on the keypad; a dial tone is heard.
 Dial the telephone number to which the call is forwarded (terminate the number with #); a confirmation tone
is heard.
Deactivate
[KeyCFDeact]
Keypad sequence that deactivates any of the forward options.
After the sequence is pressed a confirmation tone is heard.
Caller ID Restriction
Note that the caller ID presentation can be viewed in the Caller Display Information table (refer to Section
5.5.7.3 on page 116)
Activate
[KeyCLIR]
Keypad sequence that activates the restricted Caller ID option.
After the sequence is pressed a confirmation tone is heard.
Deactivate
[KeyCLIRDeact]
Keypad sequence that deactivates the restricted Caller ID option.
After the sequence is pressed a confirmation tone is heard.
Hotline
Note that the destination phone number and the auto dial status can be viewed in the Automatic Dialing table
(refer to Section 5.5.7.2 on page 115)
Activate
[KeyHotLine]
Keypad sequence that activates the delayed hotline option.
To activate the delayed hotline option from the telephone:
 Dial the preconfigured sequence number on the keypad; a dial tone is heard.
 Dial the telephone number to which the phone automatically dials after a
configurable delay (terminate the number with #); a confirmation tone is
heard.
Deactivate
[KeyHotLineDeact]
Keypad sequence that deactivates the delayed hotline option.
After the sequence is pressed a confirmation tone is heard.