Specifications

e-mail: [e-mail] voice: 360.854.9559 fax: [phone]
16
Broadcast Tools
®
ACS 8.2 Plus Eight Input, Dual Output StereoMatrix Audio Control Switcher
INSTALLATION
INSTALLATION GUIDELINES
Set-up Commands:
*uMM - Open up Menu
*uC4x - Set RS-232 mode timings: x = 1, Turn ON RS-232 mode
NO delays on sending data. x = 0, Turn OFF RS-232 mode
(delay for RS-232 charge pump startup before sending
response, unless ID = 0).
*uCCx - Set Serial Speed. See dipswitch SW17-3 & 4.
*uCEx - Enable Error and Good Responses - Where x = Y to enable
and N = disable. In this mode, when a command is sent that
is in error, the unit will reply (possibly before receiving the
entire command) with “EEE.” If the command is sent cor-
rectly, the unit will reply with “RRR.”
*uCDEF - Set factory defaults.
*uCIIttt - Set “PIP” Programmable Pulse Stretcher Input Duration =
ttt: 000 –> 255 hundredths of seconds (255 = 2.55 Seconds)
*uCIOiittt - Ignore, send OK
*uCLx - Lock Front Panel if x is “L”. Unlock Front Panel if x is “U”
*uCPR - Power up audio state: Restore audio from power up state
*uCPS - Power up audio state: Save power up state
*uCRtt - Set Relay/OC momentary Pulse Length – tt: 00-99 for 00 –>
9.9 Seconds
*uCSAtttt - Set silence sensor time delay to tttt seconds (0002 – 9999),
0000 = OFF
*uCSBtttt - Set silence sensor restore delay to tttt seconds (0002 –
9999), 0000 = OFF
*uCSDttt - Ignore, send OK
*uCST - Ignore, send OK
*uCSVttt - Ignore, send OK
Glossary Of Command Notation:
Character String
Meaning
Allowable
Values
u Unit ID 0-3
ii Input Number 01-08
o Output Number 1-2
r Output Relay 1-8
r Open Collector 1-8