6000N Play User Manual
1: Important safety instruction AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR WARNING: SHOCK HAZARD-DO NOT OPEN This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside.
2: Contents audiolab 6000N Play GETTING STARTED ………………………………………………………………………………………………………………………………………………………………………………… 4 CONTROLS AND FUNCTIONS ………...........................…………………………………………………………………………………………………………………………………. 5 CONNECTION ……………………………………………………………………………………………………………………………………………............………………….…………..... 7 DTS PLAY-FI® WIRELESS STREAMING TECHNOLOGY ……………………………………………………………………………………………………………………………… 8 DOWNLOAD THE APP ……………………………………………………………………………………………………………………………………………………………….…………….
3: Getting started Introduction Welcome to Audiolab 6000N Play - a wireless audio streaming player which is the latest member of the acclaimed Audiolab 6000 series of components. Featuring DTS Play-Fi Technology, music can be streamed over your wireless network in high resolution format and can be easily expanded to a multi-room system if required. You can stream from any source on your wireless network, including smart-phones, tablets or PCs as well as a NAS Drive.
4: Controls and functions - 1 Page 5 1.Indicators Device States LED States Standby Mode LED is dark red Initialization Mode LED fast-flash white Standard Setting Mode LED slow-breathe white WPS Mode LED double-flash white Network Connecting LED slow-flash white WiFi Network Connection LED is bright white Wired Network Connection LED is bright red 2.The PRESET Button Store/Play Internet Radio Stations - up to 6 Stations can be stored.
4: Controls and functions - 2 Page 6 3.Standby Button 9.Wi-Fi Setting Button When in Standby mode, the power LED will glow in dark red. There are various standby mode options available. You can activate these options by holding the Standby button for 4 seconds and Press and hold the Wi-Fi Setting Button for 4 seconds to enter WPS mode. Press and hold for 8 seconds to enter the Standard setup mode. then; 10.
5.Connection Note: 1. For Audiolab 6000N the COAX and OPT outputs transfer the PCM digital signal at up to 24 bit/192kHz resolution. 2. Using the DTS Play-Fi APP the volume of the analogue output can be controlled. When using the 6000N with the Audiolab 6000A amplifier, connect the USB Control Interface to the 6000A Update input to synchronise the volume of the 6000A using the APP.
6: DTS PLAY-FI® wireless streaming technology Page 8 Key Features DTS Play-Fi puts you in complete control of your music. It gives you the freedom to effortlessly stream via Wi-Fi ® from any device to any speaker in any room in your house. It’s never been easier to listen to music with the people you love, in the place you love most. A place where memories are made and music plays the starring role. MULTI-SPEAKER DTS Play-Fi is open to all speakers, no matter the size, shape, or brand.
7.Download the APP Page 9 Download the DTS Play-Fi APP Network settings The DTS Play-Fi APP can be downloaded from the Google Play Store, Amazon APP Market or Apple App Store. For Windows PC you can download the Play-Fi Windows APP from the official website: https://play-fi.com Wired network setting Connect the Ethernet Port to the LAN port of a wireless router using a suitable cable. After switching on the 6000N, the red LED indicators on the front and rear panels will flash during the connection phase.
8.Wi-Fi connection using the APP Page 10 For Andriod users: For Apple iOS users: (1) Open the DTS Play-Fi APP, then click the 'Set-up your Play-Fi device' button. (1) Download the Play-Fi APP. Before opening the APP please switch to the Settings - Wi-Fi menu on your smartphone or tablet and select 'PlayFiXDeviceXXXXXX' from the options. (2) When it has found the 6000N click the 'Set-Up' button. Next input the Wi-Fi password for your wireless network. Then click the 'Next' button.
9.Wi-Fi connection setup using a Windows PC or Mac For PC or Mac users: Page 11 (6) Select your wireless router Wi-Fi network. If you cannot connect using the DTS Play-Fi APP, or you need to do some high-level option such as setting the static IP configuration, you can setup the Audiolab 6000N Play using a web browser from your Windows PC or a Mac.
10.APP operations - 1 Page 12 Device Selection Internet Radio The DTS Play-Fi APP allows you to control and direct streaming music to a variety of Devices throughout your home that use the DTS Play-Fi system. You can set each Device to have a unique name. You can also group Devices into an Area, where each Device will play the same music. DTS Play-Fi has a built-in Internet Radio service that gives you access to thousands of radio stations and podcasts from around the globe.
10.APP operations - 2 Page 13 Media Server SoundMachine Got a hard drive full of music? Avid digital collectors can access and stream from media servers using DTS Play-Fi. The system automatically discovers and indexes music from DLNA and UPnP servers on your network. You can select and stream files in multiple formats via DTS Play-Fi, including premium tracks encoded at CD quality or even 24-bit/192kHz lossless content. No subscription required.
10.APP operations - 3 Speakers Group To stream music from 6000N Play to multi-room Devices such as DTS Play-Fi enabled Speakers, open the DTS Play-Fi APP, find the Device or Speaker, give it a name and then add it. To delete the Device or Speaker, just click on the right side of the Device name and then delete. Currently it is not recommended to wirelessly stream Hi-Res audio to speakers if you want stable, uninterrupted playback.
10.APP operations - 4 Page 15 Spotify Group Open Set Up in the DTS Play-Fi APP; click the Spotify Group. Create a new group and name for it, then select any DTS Play-Fi enabled products you want in this group (on the right side). Any speakers that can't be joined to a Spotify Group will be greyed out. Once you’re satisfied, head to the Spotify app to start streaming. So far, Audiolab 6000N Play can’t support the playing of “Surround Sound”.
11.Warranty Page 16 Audiolab Ltd. warrants this product, subject to the terms and conditions below, to be free from defects in materials and workmanship. During the warranty period Audiolab will repair or replace (at Audiolab’s option) this product, or any defective part in this product, if it is found to be defective due to faulty materials, workmanship or function. The warranty period may vary from country to country.
12.Specifications Page 17 Measurement made with 230V power supply Model 6000N Play Digital Section: Digital Output Level 500 +/- 50mVpp Output Impedance 75 ohm Frequency Response +/-0.01dB (20Hz-20kHz,ref.1kHz) Maximum Resolution 192kHz/24bit Digital Output 1 x Coaxial , 1 x Optical D to A Converter: Variable Output Voltage 0 – 2.1V DAC ES9018K2M Frequency Response +/-0.5dB(20Hz-20kHz,ref.1kHz) Total Harmonic Distortion (THD) <0.
Audiolab IAG House, 13 /14 Glebe Road, Huntingdon, Cambridgeshire, PE29 7DL, UK Tel: +44(0)1480 452561 Fax: +44(0)1480 413403 http://www.audiolab.co.