User Guide

− Telephone Answering Machine −
136
17.10 Remote access
Remote access enables the answering machine to be contacted from
any telephone which uses tone dialling in order to listen to messages
received and execute other functions.
17.10.1 Remote access security code
The answering machine is provided with a personal identification number
so only you can listen to incoming messages via the remote access
feature. The default security code set at the factory is 000".
17.10.2 Changing the remote access security code
Proceed as follows to change the security code:
 Press for 2 seconds
 or ,  Change 1st digit and confirm
 or ,  Change 2nd digit and confirm
 or ,  Change 3rd digit and confirm
17.10.3 Playing back messages via remote access
 Dial your own phone number
 Button *,  Press during the outgoing message
and enter the PIN code
Note: If an incorrect entry is made, the outgoing message is
repeated. If the security code is entered incorrectly three times,
the line is automatically disconnected.
 The Options menu is played
Button 2 Play back message
Note: Other functions can be executed via the remote access
system within the following 8 seconds. Refer to the table in
Chapter 17.10.4.
Replace receiver End remote access