User Guide

− Operation −

6 Operation

6.1 Taking a call

When a call is received, both the handset and base station ring.

Remove the handset from the base station to take the call. To end the

call, replace the handset in the base station.

 Take the call

 End the call

Note: When the handset rings, the ringing tone on the handset can

be switched off for this incoming call.



Ringing tone is switched off

6.2 Taking two calls

You will hear acoustic signals (call waiting) if a second call is received

while you are carrying out a telephone conversation. The number of the

second caller appears in the display. You can take the second call and

then switch between the two callers as necessary. One caller is put on

hold while you converse with the other.

,  Switch to other caller

Note: In order to use the supplementary services provided by

Deutschen Telekom, the Recall time must be set to 300 ms

(refer to Chapter 13.3).

Caution: The caller number display and call waiting signal are

optional services provided by your telephone network provider.

The caller number appears in the display if the service is of-

fered by your telephone network provider. Contact your net-

work provider for further information.