Instruction manual

4
POWER BUTTON USAGE
Turn On:
Press and hold the power button for 3 seconds.
Turn Off:
Press and hold the power button for 3 seconds, → tap Power off → tap OK.
Screen lock and Unlock:
Press the power button quickly to lock or unlock the screen.
Force Shutdown:
When the device isn’t responding, press and hold the power button for 7 seconds.
(Note: If it is not necessary, we don’t suggest to use Force Shutdown. You should
follow the Turn Off steps to perform the shutdown. (Force shutdown may lead to
unpredictable system errors)
RESET:
Press the Reset key to reset the device. Pressing reset will make the device reboot,
which effect is equivalent to a force shutdown.
TOUCH-SCREEN NAVIGATION
The touch-screen allows for a quick, easy and convenient navigation experience.
You can use the touch-screen as followed:
Tap:
Quick tap & release on an item on the screen.
Finger slide:
Touch & slide your finger across the screen and then release.
Touch & hold:
Touch and hold your finger in one place for approximately 2 seconds, then release
the screen to display an options window.
• To avoid scratching or crushing, do not place objects on top of the touch screen
surface.
USING MICRO SD CARD
• The device supports micro SD card’s with a maximum capacity of 32GB.
• Insert your micro SD card into the micro SD card slot until it clicks into place.
Removing micro SD Card:
Close all applications and files that have been opened from the SD card. Tap →
Settings → Storage → Uninstall SD card. Slightly press down on the SD card; it will
partially ejected, allowing you to pull the SD card out.
• Don’t insert and remove the SD card repeatedly in a short time, as this may cause
damage to the card.
• We recommend using major brands of memory cards to avoid incompatibility.
GETTING STARTED
Charging the device
• You can charge the battery by using the included adapter.
• You can also charge the device by connecting the supplied USB cable to a power
supply.
• You can use the device while the battery is charging, although the charging time
will increase when you’re operating and charging at the same time.
• Plug the AC adapter into an power outlet and connect the other end to the
devices DC interface to charge the battery. ( Fully charged in about 5 hours).
Turn the device on:
Press and hold the power button for 3 seconds.
Wi-Fi Network Setup:
Since many features and applications require a Wi-Fi connection, we recommend
you to configure a Wi-Fi connection at this point.
Tap , → Settings, → Wireless & network.
1. If Wi-Fi is turned “off”, tap “on” to turn Wi-Fi on.
2 . The device automatically scans and displays all locally detected Wi-Fi Networks.
A indicates a secure network, that requires a login name and password to connect.
3. Tap the network to which you want to connect, → if applicable, enter the login
Instruction Manual