Owner's Manual

Futur • 8ank1·3ChJrps
Transmitt., Programming
Refer to transmitter programming.
Future Bank4·6Chl rps I
ShockS.nsorAdJustm•nt lner useSensi tivi ty
I
D eere.• Sensitivity
I
PressLock+Unl ockiof 2sec onds to lock i nthecha ng eand m QI.e tO nextsetting
I
Press and 1'9 lease loc k ~ Unloc k to loc k in t he change and ex it program mi ng
Set Up & Programming
Transmitter Programming - Feature Bank 1
1. Turn the ignition ON.
2. Press and hold the valeUoverride button.
3. Within 10 seconds the system wilt chirp (3) three times.
4. Pre ss 1 button of each transmitter you wish to program.
5. The system will respond with 1 chirp for each accepted transmitter.
6. Pressing the override button at anytime during programming will advance to
th e next bank.
NOTE: The system will exit transmitter programming after 15 seconds of inactivity.
NOTE: This system
ha s 1 button programming which programs all channels of the
system.
NOTE: The system will hold up to 4 transmitters in memory, programming a 5th
transmitter will erase the oldest transmitter in memory.
NOTE: This system has PTN - Programmed Transmitter Notification. Each time the
ignition is turned ON, the LED will flash the number
of transmitters programmed to the
system.
Manual Feature Programming - Feature Bank 2 - 4
1. Turn the ignition ON .
2. Press and hold
th e valet/o ve rride button.
3. Within 10 seconds the system will chirp (3) three times.
4. Use the valet/override button to advance through each option bank. For
feature programming advance to Feature Bank
2, 3, or 4, which is (4)
four, (5)
fi ve, and (6) six chirps.
5. Use the transmitter
~ button to scroll through the selections in each
feature bank, the system will chirp to match the feature number.
6. Press the transmitter
@ button to change the desired feature. The LED will
fla
sh indi ca ting the changed feature.
Defaulting All Features: Press ing the ~ button anytime while in any of the feature
banks will default a
ll features and return you to feature bank 2- 4 chirps.
NOTE: The system will remain in feature programming mode as long as the ignition is
on, there is
no time limit. To exit programming turn the IGNITION OFF.
Chirp Delete - User Accessible
System ARM/DISARM chirps can be toggled ON or OFF without entering the
programming feature banks.
1. Turn the ignition ON then OFF.
2. Press and release the valeUprogramming button 3 times. The system
will respond with 1 chirp for ON
or 2 chirps for OFF.
User Selectable LED
This feature will control whether the LED is ON or OFF when the system is Armed/
Locked. This will
be selectable in feature programming OR on-the-fly without entering
the programming feature banks.
1. Turn the ignit ion ON, OFF , ON, OFF.
2. Press and release the valet/programming button 3 times. The system
will respo
nd with 1 chirp for ON or 2 chirps for OFF.
Dome Light Delay I Theater Dimming
The system can be programed to delay arming after th e lock button is pressed
(60 seco
nd max) for vehicles with a dome light delay or theater dimming feature.
Once programed the system will 'learn' the timing
of the dome light delay and add 2
seconds before arming.
1. Close all doors with ignition off.
2. U sing the transmitter press LOCK , UNLOCK , LOCK ,UNLOCK , LOCK ,
UNLOCK, LOCK. The LED will light solid to indicate the system ha s
entered DOME DELAY LEARN MODE .
3. Immediately OPEN then CLOSE the door WITHOUT disarming the
system. The system will then monitor the door trigger wire. Once the
dome light turns off, the system will then add 2 seconds and then exit
the learning mode.
4. The LED will begin to flash indicating the system has exited the
learning mode and is now armed.
Defaulting
the Dome Light Delay: Turn the ignition ON then OFF 3 times then
press and hold the valet button for 5 seconds, the system will chirp 1 time indicating
the learned delay time has been cleared.
PC Based Feature Programming I Firmware Updates
When using the NEW Code Alarm Utility App along with a VEPROG Programming tool you may program selectable features or update the firmware of this module.
1. To download the Code Alarm Utility App visit the Voxx University website at voxxuniversity.com.
2. Select VOXXTECH
•nd locate the utility app under th e head ing Software Downloads.
-
Technical Support [phone]
or visit
www.voxxuniversity. com
R4 1Q. 192· 9 10