User manual

Important Information
36 COMfortel 1200/1400 - Firmware Version 1.4 - COMfortel Set 3.6.0 - Setup V01 04/2014
Scope of Delivery
쐽
Telephone COMfortel 1200/1400
쐽
Receiver with spiral cable (RJ-10/RJ-10) for connecting to the telephone
쐽
ISDN cable (RJ-45/RJ-45) for connecting to the PBX
쐽
Setup Guide
쐽
Quick Guide
쐽
Leaflet “Conditions of Guarantee, Information Service“
Possible Number of System Telephones on Auerswald PBXs
Important: The power consumption of the terminals on the internal S
0
and
U
P0
ports on Auerswald PBXs may not exceed the listed values in the fol-
lowing table.
Important: If using the PBXs COMpact 5000/R and COMmander 6000/R/
RX, the max. power distribution also includes the a/b ports. For each con-
nected analogue subscriber, you must deduct 1 W from the max. power dis-
tribution.
Dimensions
(W x H x D)
COMfortel 1200: 261 mm x 89 mm x 216 mm
COMfortel 1400: 275 mm x 113/135/155 mm x 210 mm
Weight COMfortel 1200: approx. 920 g
COMfortel 1400: approx. 980 g
Temperature range 0° to 40°C
Safety CE
PBX Max. power distribution of
the total of all internal
S
0
and U
P0
ports
Max. no. of COMfortel 1200
and COMfortel 1400
COMpact 3000 2.5 W 1
COMpact 2206 USB 4 W 2
COMpact 4410 USB 12 W (4 W per port) 6 (2 telephones per port)
COMpact 5000/R 16 W (4 W per port) 12 (2 telephones per port)
COMpact 5010 VoIP 8 W (4 W per port) 4 (2 telephones per port)
COMpact 5020 VoIP 24 W (4 W per port) 12 (2 telephones per port)
COMmander 6000/R 60 W (4 W per port) 30 (2 telephones per port)
COMmander 6000 RX 160 W (4 W per port) 80 (2 telephones per port)