User manual

Preparation
44 COMfortel 1200/1400 - Firmware Version 1.4 - COMfortel Set 3.6.0 - Setup V01 04/2014
Further Steps
쑱 In order to use the headset for calls, enable the headset operation at the
end of commissioning (in functions > headset).
Important Information on the Location of the Telephone
Requirements
– Existing connections in the immediate vicinity of where the telephone is
placed:
쐽
ISDN socket outlet connected to the PBX
Note: The telephone can be operated not only on an internal S
0
port but
also on a U
P0
port on the PBX. Only one telephone per U
P0
port can be con-
nected. Also see the instructions of the PBX.
Warning: Liquid entering the casing can cause life-threatening electric
shocks and damage or destroy the telephone.
씮 Only operate the telephone in closed, dry rooms.
씮 Only clean the casing of the device with a slightly moist cloth or an anti-
static cloth.
Caution: Mechanical stress and electro-magnetic fields can result in dam-
age to or destruction of the device or impairment of its functions.
씮 Avoid mechanical loads (e.g. vibrations).
씮 Avoid the proximity of devices which radiate electro-magnetic fields (for
example, radio sets, professional radio equipment, amateur radio
equipment, mobile phones, DECT systems, WLAN routers, etc.).
씮 Do not expose the device to direct sunlight.
씮 Protect the device from dirt, excessive dust, condensation, caustic
liquids, and steam.
씮 Note the values for ambient temperature and humidity given in the tech-
nical data.
Assembling the Telephone
• Place the telephone on a clean, flat surface.
Caution: Some paints or plastics used on furniture may react chemically
with the plastic feet on the device and cause them to soften. Plastic chem-