User manual

Commissioning
COMfortel 1200/1400 - Firmware Version 1.4 - COMfortel Set 3.6.0 - Setup V01 04/2014 47
2. Insert the other ISDN cable plug into the ISDN socket connected to the
PBX.
The telephone starts up. In the meantime, the Auerswald company icon
is shown on the display.
The menu for language selection is displayed.
3. Select the desired language:
쐽
COMfortel 1200: Press the arrow keys or .
쐽
COMfortel 1400: Tap on or or press the arrow keys or .
4. Press the OK key.
5. Select the desired PBX:
쐽
COMfortel 1200: Press the arrow keys or .
쐽
COMfortel 1400: Tap on or or press the arrow keys or .
6. Press the OK key.
7. Use the keypad to enter the internal telephone number previously config-
ured in the PBX.
8. Confirm the entry:
쐽
COMfortel 1200: Press the OK key.
쐽
COMfortel 1400: Tap on OK or press the OK key.
The date and time as well as the name of the internal subscriber are
displayed. The telephone is now ready for use.
Note: If the date and time are not yet configured in the PBX, only the name
and version of the telephone are displayed.
Further Steps
쑱 Configure the telephone according to your requirements. Carry out the con-
figuration either using the menu on the telephone display (see the Opera-
tion Guide) or using the configuration software COMfortel Set (recom-
mended; see page 51).
쑱 If necessary, change the display profile to improve the contrast of the dis-
play (see the Operation Guide).
쑱 If necessary, carry out a firmware update in order to extend the telephone
with the newly available functions (see page 53). Information about new
features can be found in the internet (see www.auerswald.de/service).