User manual

Commissioning
48 COMfortel 1200/1400 - Firmware Version 1.4 - COMfortel Set 3.6.0 - Setup V01 04/2014
Commissioning the Answering Machine (only COMfortel 1400)
Requirements
– Standard microSD/SDHC card with the following features:
쐽
MicroSD/SDHC card with a capacity of up to 8 GB
– Existing release code from the Upgrade Center (against a fee, see
www.auerswald.de/service)
1. Insert the memory card, as shown, into the slot marked with on the bot-
tom of the telephone.
When is shown at the bottom right of the display, this indicates that
the memory card is being initialised and the required directory structure
is being created.
Notes: The standard announcements for different answering machine
functions are copied from the telephone to the memory card automatically
(only German and English).
You can switch off the readiness (call acceptance) by tapping on and
switch it on again by tapping on . The symbol always reflects the current
status.
Important: If the initialisation is not successful after inserting the memory
card ( is still visible with short interruptions), the card is not supported.
2. Press the menu key.
3. Tap successively on answer.machine > activation.
4. Enter the release code via the keypad.
5. Tap on OK to complete the entry.
Fig. 16: Inserting the memory card