User manual

Operation
COMfortel M-100 - Setup and Quick Guide V02 01/2014 47
2. Press to switch on the follow me function. A message ap-
pears in the display and you hear an audio signal to confirm
that you have switched on the function.
3. Press to exit this screen.
Note: You can change the *21* sequence in the DECT server.
Switching off CFU
1.
To switch off the follow me function, press #21#, and then
press .
2. Press to exit this screen.
Note: You can change the #21# sequence in the DECT server.
Ringing tones
Setting the ringing tone volume
1.
Press the Menu soft key to open the main menu.
2. Scroll to Settings and press the Select soft key.
3. Scroll to Ringing volume and press the Select soft key.
4. Press -, on the left, or +, on the right, on the navigation key,
to set the volume.
5. Press the Change soft key to save the changes and then
press the Back soft key.
Setting the ringing tone
1.
Press the Menu soft key to open the main menu.
2. Scroll to Settings and press the Select soft key.
3. Scroll to Ringing tone and press the Select soft key.
4. Scroll to the ringing tone you require and press the Change
soft key to hear the ringing tone you have selected.
5. Press the Back soft key.
Switching silent mode on/off
•
Press the Menu soft key and then press # to switch silent
mode on/off.