Operation Manual

7
BEFORE USING
UK
Connecting Lines
To connect lines with the base:
1. Connect one end of the telephone line cord
to the phone line jack on the rear bottom
of the base unit, and the other end to a
standard phone wall jack.
2. Connect the modular end of the power
adapter to the power jack next to the
phone line jack. The other end is plugged
into a free accessible standard AC wall
outlet.
3. Route the cords through the recessed
channels as shown.
To connect lines with the charger (optional for second
handset):
1. Connect the modular end of the power
adapter to the power jack of the charger.
The other end is plugged into a standard
AC wall outlet.
2. Route the cord through the recessed
channel as shown.

To phone wall jack
DECT610-uk.qxd 02.07.2004 14:14 Seite 7