Operation Manual

BEFORE USING

Using Handset Carrying Clip

The supplied handset carrying clip allows you to

conveniently carry the handset with you. It clips easily

to your belt, waist band, or shirt pocket.

If you want to remove the carrying clip:

Release the clip, and lift it off as shown

below.

If you want to attach the carrying clip:

Attach the carrying clip to the back of the

handset. Make sure that the carrying clip

locks into place.

Turning Handset On/Off

When you place the handset on the charger to

charge, the handset automatically turns on.

The phone is now ready for use.

The first time the phone turns on, the display shows

the handset (HS) and the base (BS) number.

If you purchased an optional handset and didn’t

UUNNRREEGGIISSTTEERREEDD

is displayed

when the phone turns on. To register the handset,

see page 32.

You can set the phone to display your name or an

image instead of the handset and base numbers.

See page 31.

To turn the handset on or off in Standby mode (see

“Standby mode” on page 12):

1. To turn the handset on when the display is

off, press and hold the key.

2. To turn the handset off, press and hold

the key until Bye Bye appears. Then

the display is turned off.

NNoottee::

Nothing will appear on the display when the

battery power is very low. You should fully charge

the handset before using it.

DECT610-uk.qxd 02.07.2004 14:14 Seite 9