Operation Manual

18
BASIC FUNCTION
You can page the handset from the base unit. Using
this feature, you can locate a lost handset.
1. Press the Paging key on the base unit.
Result: All handsets registered to the base rings for 30
seconds and their displays show “Paging”.
2. To stop paging, press the Paging key on
the base or any key on the handset.
NNoottee::
If a call comes in while the handset is being paged,
the handset stops paging and the bell rings.
Paging
You can lock all of the keys except for the key
to avoid accidental key presses.
To lock the keys on the handset:
1. Press and hold the key for about one
second in Standby mode.
Result:
KKEEYY LLOOCCKK
appears on the display. All keys but
the key will be locked. When a call comes
in, you can answer the call by pressing any key.
When the call ends, the keys will be locked
again.
2. To unlock, press and hold the key
again.
Locking Keys on Handset
Paging key
DECT610-uk.qxd 02.07.2004 14:14 Seite 18