Operation Manual

32
HS SETTINGS
You can change the display language.
1. Press the MENU soft key to display the
Main menu items.
2. Press the  or  key to choose HS
Settings, and press the SELECT soft key.
3. Press the  or  key to choose
3:Language, and press the SELECT soft
key.
Result: The current setting appears inside the box with a
check symbol.
4. Press the  or  key to choose the
language you want, and then press the
SELECT soft key.
5. To exit, press the key.
Selecting a Language
The supplied handset with the base unit is already
registered as handset 1. Each additional handset you
purchase must be registered to the base unit.
NNoottee
: A handset can be registered to up to 4 different
base units. And a base can be used with up to 6
handsets.
To register a handset:
1. Press the MENU soft key to display the
Main menu items.
2. Press the  or  key to choose HS
Settings, and press the SELECT soft key.
3. Press the  or  key to choose
4:Register, and press the SELECT soft
key.
4. Press the  or  key to choose the
base number you want.
NNoottee
: If a check symbol appears at the right side of the
base number, it indicates that the base number is
already registered on your handset.
5. Press and hold the Paging key on the base
unit for more than 3 seconds, then release
the key.
6. Press the SELECT soft key on the
handset.
Result
: The display asks you to enter your phone’s
Authentication Code (AC).
7. Enter 0000 (factory pre-set), and press
the SELECT soft key.
Result: When the registration is properly completed, the
display shows the handset and base number, and
returns to Standby mode.
Registering a New Handset
MENU  4  3
MENU
 4  4
Paging key
DECT610-uk.qxd 02.07.2004 14:14 Seite 32