Operation Manual

106 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Telephoning
Query Call
Ending a Query Call
If the telephone number of the query call subscriber is saved on one of the
programmable function keys (speed dialling key), you can initiate the query
call by simply pressing this key (without first tapping on ).
Ending a Query Call
If you make a query call, and the number is busy, or there is no response, proceed as described
below.
Important: Do not hang up the receiver (this will disconnect any calls waiting
in the background or initiate an unannounced transfer of the call to another
internal telephone).
• Tap on .
Note: If you would like to try this with a different telephone number, tap on
. You can then dial a new telephone number without having to explain
the repeated attempt to the person waiting on the other line.
You are now reconnected with the call partner waiting on the other line.
Options during a Query Call
The following actions are possible during a query call:
Transferring
You can use the transfer function to alternate between the call partners.
Ending One of the Two Calls
When you end a query call and would like to continue talking with one of the call partners, you
can end the call with the other call partner separately. Alternatively, one of the call partners can
simply hang up so that you can continue talking with the other call partner.