Operation Manual

110 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Telephoning
Call Transfer
Transferring with Announcement
Transferring with Announcement
Requirements:
– a query call that you initiated yourself
– to connect two external call partners: Transfer of external calls to external permission
granted in the PBX.
During a query call, proceed as described below.
• Tap on .
The two call partners are connected with each other.
Transferring without Announcement
Requirements:
– Internal transfer destination
During a call, proceed as described below.
1. Tap on .
You will hear the internal dial tone. Your current call partner is kept on hold in the PBX
(on-hold music playing).
2. Dial an internal telephone number.
3. Tap on .
The subscriber is called.
4. Put down the receiver.
The call to the internal subscriber will continue. If the subscriber accepts the call, the
connection is established.
If the subscriber being called does not accept the call, the call is transferred back to
your telephone 60 seconds later (your telephone rings).
Note: To perform call parking, dial the internal base telephone number +
park position and hang up instead of dialling the internal telephone number
(refer to the instructions for the PBX). To make this operation more
convenient, you can save the internal base telephone number + park position
on one or more programmable function keys (speed dialling key). The LEDs