Operation Manual

120 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Telephoning
Headset Call
Ending the Listen-in Function Through the Receiver
– Headset operation must be enabled
During a headset call or other call in headset operation, proceed as described below.
• Pick up the receiver.
You are now making a headset call with an enabled receiver loudspeaker.
Ending the Listen-in Function Through the Receiver
Requirements:
– Headset operation must be enabled
During a headset call with an enabled receiver loudspeaker, proceed as described below.
• Hang up the receiver.
You are now making a headset call.
• If you would like to involve the listening subscribers in the call, press the
Loudspeaker key.
You are now making the call in hands-free calling mode.
Note: If you switch off headset operation during a headset call with an
enabled receiver loudspeaker, you will be able to make a normal call using
the receiver.