Operation Manual

142 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Contacts and Telephone Number Lists
Caller List
Dialling from Within the Caller List
Dialling from Within the Caller List
You can dial from the caller list as follows:
• Using the telephone
1. Press the Message key.
The available lists are displayed.
2. Tap on Caller list (this is ignored if the other lists are empty).
The caller list now opens.
Note: If you pick up the receiver while the caller list is open, the most recently
active telephone number will be dialled immediately.
3. You can either dial the telephone number without changing it or edit the number
before dialling:
• Dial the telephone number without changes: Tap on next to the required entry.
Or touch and hold the required entry and then tap on Call <telephone number>.
• Edit telephone number before dialling: Touch and hold the required entry and then
tap on Edit No before call. Make the required changes in the dial preparation.
Then lift the receiver or tap on .
The subscriber is called.
Note: If you want to exit the caller list without dialling a telephone number,
press the back key.
Deleting Entries from the Caller List
You can delete entries from the caller list as follows:
• Using the telephone
1. Press the Message key.
The available lists are displayed.
2. Tap on Caller list (this is ignored if the other lists are empty).