Operation Manual

146 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Functions
External Line Transfer (System Telephone)
Configuring and Operating a Function Key for Exchange Line Transfer
You can configure external line transfers as follows:
• Using the configuration manager
• Using the telephone
Note: The function can only be set up on a programmable function key that
has an LED (not on a touch function key).
Using the Configuration Manager to Configure a Function Key for Exchange Line
Transfer
1. Open the Apps > Function keys screen.
2. Only COMfortel 2600/3600 IP: In the Key selection list field, select the key group
whose keys you would like to define.
Note: Keys 16 to 105 are not available until you connect COMfortel
Xtension300 key extension modules (not included in the scope of delivery) to
the telephone.
3. Click one of the following tabs:
4. In the list field next to the function key that you would like to define, select the Ext.
line transfer function.
Note: To change the settings for a function key that already has a function
assigned to it, click on that key.
The current settings for the key assignment are shown in the display.
5. In the Description entry field, enter a description for the key. Possible entries:
LED signalling on the key:
None
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters