Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 151
Functions
Call Waiting
Configuring and Operating a Function Key for Call Waiting
4. In the list field next to the function key that you would like to define, select the Call
Waiting function.
Note: To change the settings for a function key that already has a function
assigned to it, click on that key.
The current settings for the key assignment are shown in the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
7. In the Audible indication list field, select one of the following options:
8. In the Permission level list field, select one of the following options:
Further steps:
– Save your settings before you leave the screen.
Up to 64 digits
Numbers and characters
toggle: Press the key to switch call waiting on or off.
switch on: Press the key to enable call waiting.
switch off: Press the key to disable call waiting. (No further selection is
required.)
switch on: Press the key to switch the call waiting tone on (when call waiting is
switched on).
switch off: Press the key to switch the call waiting tone off (when call waiting is
switched on).
decide each time a key is pressed: Press the key to open the dialogue in
which you select the option.
User: The function key can be changed by users, sub-administrators and
administrators.
Sub-administrator: The function key can only be changed by sub-adminis-
trators and administrators.
Administrator: The function key can only be changed by administrators.