Operation Manual

152 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Functions
Call Waiting
Configuring and Operating a Function Key for Call Waiting
Using the Telephone to Configure a Function Key for Call Waiting
1. Tap on Apps > Function keys.
2. Press the function key you want to define.
Note: The LEDs of the function keys that are already filled on one level light
up yellow. If a function key is assigned on both levels, the LED is red.
3. Select one of the following options:
The list of available functions is displayed.
4. Tap:
• Functions listed alphabetically: Call waiting
• Functions sorted by group: Availability > Call waiting
The current settings for assigning the key are shown on the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
7. In the Audible indication list field, select one of the following options:
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters
toggle: Press the key to switch call waiting on or off.
switch on: Press the key to enable call waiting.
switch off: Press the key to disable call waiting. (No further selection is
required.)
switch on: Press the key to switch the call waiting tone on (when call waiting is
switched on).
switch off: Press the key to switch the call waiting tone off (when call waiting is
switched on).
decide each time a key is pressed: Press the key to open the dialogue in
which you select the option.