Operation Manual

156 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Functions
Do-Not-Disturb
Configuring and Operating a Function Key for Do-Not-Disturb
2. Only COMfortel 2600/3600 IP: In the Key selection list field, select the key group
whose keys you would like to define.
Note: Keys 16 to 105 are not available until you connect COMfortel
Xtension300 key extension modules (not included in the scope of delivery) to
the telephone.
3. Click one of the following tabs:
4. In the list field next to the function key that you would like to define, select the do-not-
disturb function.
Note: To change the settings for a function key that already has a function
assigned to it, click on that key.
The current settings for the key assignment are shown in the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
7. In the Reject callers list field, select one of the following options:
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters
toggle: Press the key to switch do-not-disturb on or off.
switch on: Enables the do-not-disturb function.
switch off: Disables the do-not-disturb function. (No further selection is
required.)
reject all callers: Press the key to switch on rejection of all incoming calls
(when do-not-disturb is switched on).
reject anonymous: Press the key to switch on rejection of anonymous calls
(when do-not-disturb is switched on).