Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 157
Functions
Do-Not-Disturb
Configuring and Operating a Function Key for Do-Not-Disturb
8. In the Permission level list field, select one of the following options:
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Configure a Function Key for Do-Not-Disturb
1. Tap on Apps > Function keys.
2. Press the function key you want to define.
Note: The LEDs of the function keys that are already filled on one level light
up yellow. If a function key is assigned on both levels, the LED is red.
3. Select one of the following options:
The list of available functions is displayed.
4. Tap:
• Functions listed alphabetically: Do-not-disturb
• Functions sorted by group: Availability > Do-not-disturb
The current settings for assigning the key are shown on the display.
5. In the Description entry field, enter a description for the key. Possible entries:
reject if not in contacts: Press the key to switch on rejection of all calls except
the ones from contacts entered in the telephone book (when do-not-disturb is
switched on).
decide each time a key is pressed: Press the key to open the dialogue in
which you select the option.
User: The function key can be changed by users, sub-administrators and
administrators.
Sub-administrator: The function key can only be changed by sub-adminis-
trators and administrators.
Administrator: The function key can only be changed by administrators.
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.