Operation Manual

158 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Functions
Do-Not-Disturb
Configuring and Operating a Function Key for Do-Not-Disturb
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
7. In the Reject callers list field, select one of the following options:
8. Tap on Assign.
9. Tap on Exit.
Up to 64 digits
Numbers and characters
toggle: Press the key to switch do-not-disturb on or off.
switch on: Enables the do-not-disturb function.
switch off: Disables the do-not-disturb function. (No further selection is
required.)
reject all callers: Press the key to switch on rejection of all incoming calls
(when do-not-disturb is switched on).
reject anonymous: Press the key to switch on rejection of anonymous calls
(when do-not-disturb is switched on).
reject if not in contacts: Press the key to switch on rejection of all calls except
the ones from contacts entered in the telephone book (when do-not-disturb is
switched on).
decide each time a key is pressed: Press the key to open the dialogue in
which you select the option.