Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 161
Functions
Automatic Bandwidth Amplification
Configuring and Operating a Function Key for Automatic Bandwidth Amplification
Note: To change the settings for a function key that already has a function
assigned to it, click on that key.
The current settings for the key assignment are shown in the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
7. In the Permission level list field, select one of the following options:
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Configure a Function Key for Automatic Bandwidth Amplifi-
cation
1. Tap on Apps > Function keys.
2. Press the function key you want to define.
Note: The LEDs of the function keys that are already filled on one level light
up yellow. If a function key is assigned on both levels, the LED is red.
3. Select one of the following options:
Up to 64 digits
Numbers and characters
toggle: Press the key to switch automatic bandwidth amplification on or off
depending on the status.
switch on: Press the key to switch automatic bandwidth amplification on.
switch off: Press the key to switch automatic bandwidth amplification off.
User: The function key can be changed by users, sub-administrators and
administrators.
Sub-administrator: The function key can only be changed by sub-adminis-
trators and administrators.
Administrator: The function key can only be changed by administrators.