Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 171
Functions
Follow-Me
Switching Follow-Me On/Off
Follow-Me
Follow-me is a type of "unconditional internal subscriber call forwarding" that is configured on
the individual destination telephone (instead of on the forwarding telephone). This gives you
the option of moving from room to room and taking the calls with you.
Switching Follow-Me On/Off
You can switch the Follow-me function on or off as follows:
• Using the telephone
Requirements:
– Controlling of the PBX via telephone permission assigned in the PBX
– Call forwarding (groups)/Follow-me permission assigned in the PBX
To enable or disable the Follow-me function, press a function key that has been configured
for the Follow-me function.
Alternatively, proceed as described below.
1. Tap:
• Functions listed alphabetically: Apps > Functions > Follow-me
• Functions sorted by group: Apps > Functions > Availability >
Follow-me
2. In the Operation list field, select one of the following options:
3. Select the subscriber whose calls you want to be forwarded:
• Manual entry: In the Number to forward entry field, enter an internal telephone
number.
• Selection: Tap on and select an internal telephone number.
disable all: Disables all of the currently enabled Follow-me functions. (No
further action is required.)
switch on: Enables Follow-me for a subscriber.
switch off: Disables Follow-me for a subscriber.