Operation Manual

174 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Functions
Follow-Me
Configuring and Operating a Function Key for Follow-Me
2. Press the function key you want to define.
Note: The LEDs of the function keys that are already filled on one level light
up yellow. If a function key is assigned on both levels, the LED is red.
3. Select one of the following options:
The list of available functions is displayed.
4. Tap on Follow-me.
The current settings for assigning the key are shown on the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
7. Select the subscriber whose calls you want to be forwarded:
• Manual entry: In the Number to forward entry field, enter an internal telephone
number.
• Selection: Tap on and select an internal telephone number.
8. Tap on Assign.
9. Tap on Exit.
Requirements for using the function:
– Controlling of the PBX via telephone permission assigned in the PBX
– Call forwarding (groups)/Follow-me permission assigned in the PBX
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters
disable all: Press the key to switch all Follow-mes off.
switch on: Press the key to switch Follow-me on.
switch off: Press the key to switch Follow-me off.
decide each time a key is pressed: Press the key to open the dialogue in
which you select the option.