Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 177
Functions
Targeted Exchange Line Access (System Telephone)
Configuring and Operating a Function Key for Targeted Exchange Line Access
4. In the list field next to the function key that you would like to define, select the
Exchange line function.
Note: To change the settings for a function key that already has a function
assigned to it, click on that key.
The current settings for the key assignment are shown in the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Account list field, select the system telephony account.
7. In the MSN entry field, enter the external telephone number that you want to transfer
during targeted exchange line access (without an exchange line access number and
without a prefix). Possible entries:
8. In the Permission level list field, select one of the following options:
Further steps:
– Save your settings before you leave the screen.
Requirements for using the function:
– The telephone is a system telephone in an Auerswald PBX
Using the Telephone to Configure a Function Key for Targeted Exchange Line Access
1. Tap on Apps > Function keys.
Up to 64 digits
Numbers and characters
Up to 40 digits
Numbers
User: The function key can be changed by users, sub-administrators and
administrators.
Sub-administrator: The function key can only be changed by sub-adminis-
trators and administrators.
Administrator: The function key can only be changed by administrators.