Operation Manual

180 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015

Functions

Groups (System Telephone)

Logging the Telephone In/Out

Incoming and outgoing

When logging into a group as "incoming and outgoing", the subscriber is then in the call distri-

bution of that group for internal, exchange line and door calls and also acquires a number of

additional characteristics/permissions from the group. These replace the subscriber's own

characteristics/permissions as an individual subscriber for outgoing work-related calls.

Note: If a subscriber logs in to more than one group as "incoming and

outgoing", the subscriber will only remain logged in as "incoming and

outgoing" in the group that the subscriber last logged into. In all other groups,

the subscriber is then only "logged in as incoming".

Logging the Telephone In/Out

You can log the telephone in or out as follows:

• Using the telephone

Requirements:

– The telephone is a system telephone in an Auerswald PBX

– The telephone is a member of at least one group configured in the PBX

– Controlling of the PBX via telephone permission assigned in the PBX

To log a telephone in to a group, or out of it, press the function key that has been configured

for group functions.

Alternatively, proceed as described below.

1. Tap:

• Functions listed alphabetically: Apps > Functions > Group

• Functions sorted by group: Apps > Functions > Groups > Group

2. In the Operation list field, select one of the following options:

3. In the Call direction list field, select one of the following options:

Logout: Logs the telephone out of the group.

outgoing: Select the type of call for outgoing.