Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 181
Functions
Groups (System Telephone)
Logging Telephone Out of All Groups
4. Select the required group:
• Manual entry: In the Group entry field, enter the group telephone number.
• Selection: Tap on and select the group based on its name.
5. Tap on Execute.
Logging Telephone Out of All Groups
You can log a telephone out of all groups out as follows:
• Using the telephone
Requirements:
– The telephone is a system telephone in an Auerswald PBX
– The telephone is a member of at least one group configured in the PBX
– Controlling of the PBX via telephone permission assigned in the PBX
To log your telephone out of all groups, press the function key that has been configured for
logging out of all groups.
Alternatively, proceed as described below.
1. Tap:
• Functions listed alphabetically: Apps > Functions > Group function
off
• Functions sorted by group: Apps > Functions > Groups > Group
function off
2. Tap on Execute.
Configuring and Operating a Function Key for the Group Function
Press the key to execute the action configured in the key for the specified group.
incoming: Select the type of call for incoming.
incoming & outgoing: Selects the type of call for incoming & outgoing.