Operation Manual

184 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015

Functions

Groups (System Telephone)

Configuring and Operating a Function Key for the Group Function

Using the Telephone to Configure a Function Key for the Group Function

Requirements:

– The telephone is a member of at least one group configured in the PBX

1. Tap on Apps > Function keys.

2. Press the function key you want to define.

Note: The LEDs of the function keys that are already filled on one level light

up yellow. If a function key is assigned on both levels, the LED is red.

3. Select one of the following options:

The list of available functions is displayed.

4. Tap:

• Functions listed alphabetically: Group

• Functions sorted by group: Groups > Group

The current settings for assigning the key are shown on the display.

5. In the Description entry field, enter a description for the key. Possible entries:

Note: The key description is used for printing the label and in the display.

6. In the Operation list field, select one of the following options:

7. In the Call direction list field, select one of the following options:

Level 1: Keys are assigned on the first key level.

Level 2: Keys are assigned on the second key level.

Up to 64 digits

Numbers and characters

toggle log state: press this key to log the telephone in or out, depending on

current status.

Logout: Press the key to log the telephone out of the group.

outgoing: Press the key to switch on the "outgoing" call type.

incoming: Press the key to switch on the "incoming" call type.