Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 185
Functions
Groups (System Telephone)
Configuring and Operating a Function Key for Logging Out of All Groups
8. Select the required group:
• Manual entry: In the Group entry field, enter the group telephone number.
• Selection: Tap on and select the group based on its name.
9. Tap on Assign.
10. Tap on Exit.
Requirements for using the function:
– The telephone is a system telephone in an Auerswald PBX
– Controlling of the PBX via telephone permission assigned in the PBX
Configuring and Operating a Function Key for Logging Out of All Groups
Press the key while the telephone is in the idle state (sleep) to log the telephone out of all
groups.
You can configure a function key for logging out of all groups as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Configure a Function Key for Logging Out of All
Groups
Requirements:
incoming & outgoing: Press the key to switch on the "incoming & outgoing"
call type.
decide each time a key is pressed: Press the key to open the dialogue in
which you select the option.
LED signalling on the key:
green The telephone is logged in as incoming in all groups in which it is a member
and in one group as outgoing.
yellow The telephone is logged in to at least one group.
off The telephone is not logged in to any groups.