Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 189
Functions
Groups (System Telephone)
Configuring and Operating a Function Key for Displaying the Group State
Note: Keys 16 to 105 are not available until you connect COMfortel
Xtension300 key extension modules (not included in the scope of delivery) to
the telephone.
3. Click one of the following tabs:
4. In the list field next to the function key that you would like to define, select the function
Group status.
Note: To change the settings for a function key that already has a function
assigned to it, click on that key.
The current settings for the key assignment are shown in the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Account list field, select the system telephony account.
7. In the Group entry field, enter the group telephone number.
8. In the Permission level list field, select one of the following options:
Further steps:
– Save your settings before you leave the screen.
Requirements for using the function:
– The telephone is a system telephone in an Auerswald PBX
– Speed dialling keys assigned to the corresponding subscriber telephone numbers.
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters
User: The function key can be changed by users, sub-administrators and
administrators.
Sub-administrator: The function key can only be changed by sub-adminis-
trators and administrators.
Administrator: The function key can only be changed by administrators.