Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 193
Functions
Headset Operation
Configuring and Operating a Function Key for Headset Operation
2. Only COMfortel 2600/3600 IP: In the Key selection list field, select the key group
whose keys you would like to define.
Note: Keys 16 to 105 are not available until you connect COMfortel
Xtension300 key extension modules (not included in the scope of delivery) to
the telephone.
3. Click one of the following tabs:
4. In the list field next to the function key that you would like to define, select the function
Headset.
Note: To change the settings for a function key that already has a function
assigned to it, click on that key.
The current settings for the key assignment are shown in the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
7. In the Auto-accept list field, select one of the following options:
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters
toggle: Press the key to switch headset operation on or off.
switch on: Enables headset operation.
switch off: Enables headset operation. (No further selection is required.)
switch off: Press the key to switch off automatic call acceptance when
headset operation is switched on.
switch on: Press the key to switch on automatic call acceptance when headset
operation is switched on.
switch on (play tone): Press the key to switch on automatic call acceptance
and the attention tone when headset operation is switched on.
decide each time a key is pressed: Press the key to open the dialogue in
which you select the option.