Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 195
Functions
Headset Operation
Configuring and Operating a Function Key for Headset Operation
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
7. In the Auto-accept list field, select one of the following options:
8. Enter a value in the Auto-accept timeout entry field. Possible entries:
9. Tap on Assign.
10. Tap on Exit.
Requirements for using the function:
– Connected headset
toggle: Press the key to switch headset operation on or off.
switch on: Enables headset operation.
switch off: Enables headset operation. (No further selection is required.)
switch off: Press the key to switch off automatic call acceptance when
headset operation is switched on.
switch on: Press the key to switch on automatic call acceptance when headset
operation is switched on.
switch on (play tone): Press the key to switch on automatic call acceptance
and the attention tone when headset operation is switched on.
decide each time a key is pressed: Press the key to open the dialogue in
which you select the option.
0 to 99: After 0 to 99 seconds, an incoming call is automatically accepted,
depending on the entry.