Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 199
Functions
InterCom OneWay/Speakerphone
Configuring and Operating a Function Key for InterCom OneWay
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
7. In the Account list field, select the account for the required PBX.
8. Enter the required in-house telephone number in the InterCom destination entry
field.
9. In the Permission level list field, select one of the following options:
Further steps:
– Save your settings before you leave the screen.
Requirements for using the function:
– Telephone is a system telephone on an Auerswald PBX or InterCom OneWay is performed
on an Auerswald PBX for which the sequence ##011 has been entered under Settings >
Providers & PBXs > Name of Provider/PBX > Special numbers > Keypad sequence for
InterCom speakerphone
– InterCom permission is present at the InterCom destination
Using the Telephone to Configure a Function Key for InterCom OneWay
1. Tap on Apps > Function keys.
2. Press the function key you want to define.
Up to 64 digits
Numbers and characters
Hold: The key must be held down during the announcement.
toggle: A short press of the key starts the announcement. Another short press
of the key ends the announcement.
User: The function key can be changed by users, sub-administrators and
administrators.
Sub-administrator: The function key can only be changed by sub-adminis-
trators and administrators.
Administrator: The function key can only be changed by administrators.